Question
The Flex kit is installed on a bulldozer and the machine body is calibrated with a total station (TS), but it is unclear where to measure the crawler (PS3, PS4).
Answer
Measure the position on the side of the crawler, dropped vertically from the center of the idler and sprocket. Regarding the measuring height in particular, if the crawler is raised off the ground, aim for the intersection with the extension line of the ground contact surface.
Key point
The crawler measurement positions above (PS3, PS4) greatly affect the result of the measurement function (accuracy check), so we recommend measuring based on the center of the idler and sprocket.
Comments
0 comments
Please sign in to leave a comment.